Eaton PowerXL DG1 Series VFD, Communications Manual, Page: 53 / 152

EtherNet/IP On-Board Communications
PowerXL DG1 Series VFD
MN040010EN—May 2014 www.eaton.com
39
Process Data In (Master to Slave)
Control word, Reference and Process Data are used with
different PowerXL applications as follows.
Table 66. Standard and Multi-Pump
Table 67. Multipurpose Control
Table 68. PID Control
Data Value Data Type Unit Scale Default
FBFixedControlWord Start/Stop/Fault reset Command UINT — — —
Reference Speed Reference UINT % 0.01% 0
PD1–PD8 Not used — — — —
Data Value Data Type Unit Scale Default
FBFixedControlWord Start/Stop/Fault reset Command UINT — — —
Reference Speed Reference UINT % 0.01% 0
Process Data IN1 Torque Reference UINT % 0.10% 0
Process Data IN2 Reference for PID1 controller UINT % 0.01% 0
Process Data IN3 Actual Value 1 to PID1 controller UINT % 0.01% 0
Process Data IN4 Actual Value 2 to PID1 controller UINT % 0.01% 0
Process Data IN5 Reference for PID2 controller UINT % 0.01% 0
Process Data IN6 Actual Value 1 to PID2 controller UINT % 0.01% 0
Process Data IN7 Actual Value 2 to PID2 controller UINT % 0.01% 0
Process Data IN8 Not used — — — —
Data Value Data Type Unit Scale Default
FBFixedControlWord Start/Stop/Fault reset Command UINT — — —
Reference Speed Reference UINT % 0.01% 0
Process Data IN1 Not used — — — —
Process Data IN2 Reference for PID1 controller UINT % 0.01% 0
Process Data IN3 Actual Value 1 to PID1 controller UINT % 0.01% 0
Process Data IN4 Actual Value 2 to PID1 controller UINT % 0.01% 0
Process Data IN5 Reference for PID2 controller UINT % 0.01% 0
Process Data IN6 Actual Value 1 to PID2 controller UINT % 0.01% 0
Process Data IN7 Actual Value 2 to PID2 controller UINT % 0.01% 0
Process Data IN8 Not Used — — — —