Eaton Powerware 5115A USB, User Manual, Page: 16 / 44

10
Powerware
®
5115A USB User’s Guide
•
www.powerware.com.au
Operation
U P S F r o n t P a n e l
The UPS front panel indicates the UPS status and also identifies potential power
problems. Figure 7 shows the UPS front panel indicators and controls
If the alarm beeps or any alarm indicators are on, see Table 8 on page 26 to identify
and correct the problem
I n i t i a t i n g t h e S e l f - Te s t
Press and hold the button for three seconds to initiate the self-test. If the UPS finds
a problem, an LED indicates where the problem is. For more information, see
“Troubleshooting” on page 26.
Figure 7. UPS Front Panel
NOTE The batteries must be fully charged and the UPS must not be in Battery mode
to perform the self-test.