Eaton Power Xpert PXGMS, Quick Start Instructions

Page: 5 / 28

Eaton PXGMS Card Quick Start Instructions 164000208—Rev 4 1
C Chhaapptteerr 11 IInnssttaallllaattiioonn C Chheecckklliisstt
1. Verify that the following items are available:
o
Power Xpert Gateway Minislot (PXGMS) UPS Card package contents (card, cable, Quick Start
Instructions)
o Phillips ® screwdriver
o Available USB port on a computer running Microsoft ® Windows ®
o Web browser (Microsoft Internet Explorer ® version 11.0 and higher, Mozilla ® Firefox ® , or
Google Chrome™ are recommended)
2. If you are going to use Dynamic Host Configuration Protocol (DHCP), provide your local network
administrator with the card's MAC address. The MAC address is located on either the shipping box label or
the label on this card.
o MAC Address _______________________________________________
3. If you are not going to use DHCP to provide any of the settings listed below, contact your local network
administrator for the settings.
In the table below, check the DHCP check box or enter the values for manual configuration. This data is
referenced later in the procedure.
Item DHCP*
Manual Configuration
IPv4 o
Card IP Address: _______________________________
Netmask: _____________________________________
Gateway: _____________________________________
DNS – Name Servers
o
Name Server #1:________________________________
Name Server #2:________________________________
Name Server #3:________________________________
DNS – Domain
o
Domain:_________________________________________
* The network administrator normally sets up the DHCP server to provide a static IP address each time the card makes a
DHCP request.
4. If you need e-mail functionality, obtain the SMTP mail server's IP address or host name. If using the SMTP
host name, verify that you also have the Name Server IP address (see
Step 3 ).
o SMTP (mail server) IP Address
or Host Name
__________________________________________________________________________________