![background image](http://html1.mh-extra.com/html/eaton/power-xpert-pxes4p-series/power-xpert-pxes4p-series_installation-and-user-manual_4163534034.webp)
PXES4P Switches
Installation and User Guide (10/06)
0.4 amp max.(24V DC)
0.2 amp max.(-48V DC)
Power Consumption
: 3 watts typical, 4 watts max.
3.7 PXES4P, DC-powered, -48VDC, 24VDC and 12VDC Installation
This section describes the proper connection of the -48VDC leads (or 24VDC,
12VDC leads) to the Direct DC power terminal
block on the PXES4P hardened media converter (as
shown in Figure above)
.
The DC terminal block on
the PXES4P is located on the left side of the unit
and is equipped with three (3) screw-down lead
posts. The power terminals are identified as positive
(+) and negative (-), and they are floating inside the unit so that the user if desired may
ground either of the terminals. The chassis is “earth” or ground (GND).
33