Eaton Power Xpert 9395C UPS Installation and Operation Manual 164000821—Rev 06
109
77..33..22
U
Ussiinngg tthhee TToouucchh S
Sccrreeeenn
The touch screen control panel provides an operator interface with the UPS system.
identifies the
display areas discussed in the following sections.
Touching an area on the screen that requires a password brings up the Sign In Request pop-up. Touch the X in
the upper right corner of the pop-up, then touch the padlock symbol in the upper right corner to obtain the
password request pop-up (see
).
Figure 68. Parts of the Touch Screen
A
B
~
~
~
~
A
The
UPS status area
automatically displays the Eaton model number, current time and date, active alarms, active notices,
and load percent and battery run time for the UPS. If the Eaton Environmental Monitoring Probe is installed, the
temperature and humidity sensed by the probe will also be displayed. The small head symbol between the system model
and time allows the operator select a different language from an imbedded list.
The top line of the display blinks while scrolling when the system needs attention. Some notices and alarms may be
accompanied by an audible horn. To silence the horn, touch anywhere on the control panel once. For more information
about alarms and notices, see paragraph
.
B
The
information area
contains data about UPS status and operations.
C
After touching the padlock in the upper right corner, the numerical keypad appears to allow entry of the system access
pass code for operation. See
Security Levels and Functions.
Summary of Contents for Power Xpert 9395C
Page 8: ......
Page 175: ...16400082106 164000821 06...
