Eaton Power Xpert 9395C UPS Installation and Operation Manual 164000821—Rev 06
105
C
Chhaapptteerr 77 U
UP
PS
S O
Oppeerraattiinngg IInnssttrruuccttiioonnss
This section describes how to operate the UPS.
NOTE
Before starting the UPS, ensure all installation tasks are complete and a preliminary
startup has been performed by authorized service personnel. The preliminary startup
verifies all electrical interconnections to ensure the installation was successful and the
system operates properly
NOTE
Read this section of the manual and have thorough knowledge of UPS operation before
attempting to operate any of the controls.
NOTE
The UPS displays two minutes of battery runtime at the initial startup. After a 24-hour
charging period, the UPS automatically runs a battery test and the correct battery
runtime displays
NOTE
Refer to
for a description of UPS modes of
operation.
77..11
U
UP
PS
S C
Coonnttrroollss aanndd IInnddiiccaattoorrss
The controls and indicators identified and described in this section are used to control and monitor UPS
operation.
Identifies the touchscreen control panel.
Figure 65. UPS Controls and Indicators
ISBM
ISBM
(Right Door
Removed)
Touchscreen
Control Panel
Summary of Contents for Power Xpert 9395C
Page 8: ......
Page 175: ...16400082106 164000821 06...
