Eaton Power Xpert 9395 550/275, Installation And Operation Manual

Page: 124 / 208

UPS Operating Instructions
7-2 Power Xpert
TM
9395 550/275 UPS (225–550 kVA) Installation and Operation Manual 164201716—Rev 8 www.eaton.com/powerquality
7.1.1 Control Panel
The control panel is used to set up and control the UPS, and to monitor UPS operation. For a description of the
UPS control panel functions, see paragraph 7.2.
7.1.2 Circuit Breakers
Optional circuit breaker (CB1) is used to control the AC input to the UPS rectifier. CB1 is not available with the
separate UPM rectifier feed configuration.
7.2 Using the LCD Control Panel
The following paragraphs describe the UPS control panel, including controls and indicators, and how to monitor
UPS operation. The control panel (see Figure 7-2) is located on the front door of the UPS.
Figure 7-2. UPS Control Panel
The control panel consists of:
l
A liquid crystal display (LCD) ( 1 )
l
A horizontal row of pushbutton switches ( 2 )
l
A vertical column of status indicators ( 3 ). See paragraph 7.2.1.
The following paragraphs describe using the UPS control panel to monitor the UPS. See paragraph 7.3 for use
of the operational controls.
When the unit powers up, the screen displays the Eaton logo as shown in Figure 7-2. To advance to the Main
Menu and Mimic screen, press any control panel pushbutton once.
3
1
2
PRESS ANY KEY TO CONTINUE