Eaton NZM2-XKSA, Instruction Leaflet

Page: 2 / 2

2/2 Emergency On Call Service: Local representative ( http://www.eaton.com/moeller/aftersales ) or +49 (0) 180 5 223822 (de, en)
11/10 I
L01206007Z
Eaton Industries GmbH, Hein-Moeller-Straße 7-11, 53115 Bonn, Germany
© 2002 by Eaton Industries GmbH,
www.eaton.com/moeller/support All Rights Reserved
11/10 IL01206007Z 12256581/DE17 DHW/DM
Printed in Germany (01/11)
j
Combination options – Kombinationsmöglichkeiten – Combinaisons possibles – Combinaciones posibles – Combinazioni possibili – –
Комбинационные возможности
F 415 V j + j j
F 525 V j + j j +
F 690 V
j
+
j
+
j
+
USE of Terminal Cover NZM2-XKSA on UL/CSA models:
– Terminal cover NZM2-XKSA maintains electrical clearances and provides protection against accidental contact
with live parts in the incoming and outgoing supply circuit terminations of the circuit breaker or switch.
– Top and bottom portions of the terminal cover are mounted as shown in preceeding diagrams.
– Use of the NZM2-XKSA terminal cover is always necessary with Type XKS screw terminations when making
connections with bare bus or non-insulated crimp lugs, or when two wires per phase are connected.
– Follow guidelines illustrated above for additional connection combinations.
1
ON
Trip
35
35
Z 2
1 Nm
(9 lb-in)
2
Minimum Clearance
space for all models
mm inch
35 1.4
4
x M4 x 85/20
3
2
1
Z 2
1.3 Nm
(11.5 lb-in)
Connector Type
NZM2-XKA
Compression
Crimp lugs
Use the terminal cover Type NZM2-XKSA
in all cases when making connections
with lug types pictured above.
Top and bottom portions of Terminal cover Type NZM2-XKSA shown shaded in above diagrams.
f
400 mm
(
f
16”)
XKSA
XKSA XKSA
XKSA XKSA XKSA