![background image](http://html1.mh-extra.com/html/eaton/moeller-series/moeller-series_manual_3856787019.webp)
15
10/12 MN04913001Z-EN
3
Installation
Mounting
The CMD contactor monitoring device is mounted on a top-
hat rail. Any mounting position is possible.
Figure 2:
Mounting positions for CMD
Connection
The CMD relay can be used for DOL starters and for reversing
starters.
90°
90°
90°
90°
h
The electrical mounting space must at least meet the
requirements of IP54 protection.
During installation, a lateral clearance of at least 22.5 mm
must be kept from other devices.
h
All connected devices, such as pushbuttons, must have a
rated insulation voltage U
i
f
300 V.
Summary of Contents for Moeller Series
Page 12: ...8 10 12 MN04913001Z EN...