FITTING EMBL2
For extra security
fit padlock
List No. PD2
FITTING DOOR LOCK EMDL & EMPL
M6 KEY HOLE FIXINGS
10
130
100
OVERALL DIMENSIONS
A
37.6
161
254
B
All dimensions in mm
A
B
EAM4
238
163
EAMMP65
238
163
EAM7
292
217
EAM10
346
271
EAM13
440
365
EAM9M/MB
440
365
EAM16
454
379
EAM12M/MB
454
379
EAMSL66M/MB
454
379
EAMSL93M/MB
454
379
=
=
Remove
Plastic Knob
Insert Lock into hole tighten back nut
Warning -
Intellectual Property Rights
Eaton wishes to make it clear that it owns intellectual property rights in the
product which it manufactures (whether or not listed in this leaflet) and that
it will take legal action against any party found to be manufacturing, using,
or selling any article which infringesthe
company’s intellectual property. All
marks in this document identified with an R symbol or a TMsymbol adjacent
to the mark are trademarks of Eaton.
C
2019 Eaton Electric Limited.
All rightsreserved.
The use to which this product is put and its place of installation is outside our
control. Particular care should therefore be taken tofollow the instructions given
here and to ensure their continued availability in conjunction with the use of the
product.
No responsibility can be accepted by us if these instructions are disregarded.
Further copies of these instructions and information concerning the installation
and proper use of thisproduct can be obtained by contacting the:
Technical Services Department
Eaton Electric Limited, Middleton, Manchester, M24 1GQ. UK
Tel: +44(0)8700 545 333,
email: [email protected]
Suitable for Indoor, Stationary applications
Mechanical Protection : IK06
IP Rating : IP3X
EMC Classification : B
Pollution Degree : 3
Construction Type : Fixed
Frequency (fn) : 50Hz
MCB (2A
– 50A) = Rating as marked, (63A) = 55A Inc. Subject to applicable RDF - per table 101, IEC/EN61439-3
INTERFACE CHARACTERISTICS
Type A DBO to IEC/EN61439-3
Rated Voltage / Rated Operational voltage (Un / Ue) : 240V a.c.
Rated Impulse Withstand Voltage (Uimp) : 4kV
Rated Insulation Voltage (Ui) : 415V
Rated Conditional Short Circuit Current (Icc) : 15kA
Rated Current of the Assembly (InA) : See DB Rating label (65A - 125A)
Rated Diversity Factor(s) RDF : 0.7
Rated Current of each Circuit (Inc) :
RCCB (100A) = 90A Inc.
RCBO (6A-45A) = Rating as marked
– subject to applicable RDF
