4
EATON
IB515008EN
Installation instructions
Installation Instructions – RPGC Round Parking Garage and Canopy
PENDANT MOUNTING
1. Feed input wire leads through a 3/4” threaded conduit
pipe (not supplied) and seal with teflon tape. Wire
leads extend 15” from the back of the housing. Screw
conduit pipe into fixture threading.
2. Attach fixture with conduit pipe to junction box and
make electrical connections referring to step 5 of
Junction Box Mounting section.
MOTION SENSOR LENS INSTALLATION
(IF APPLICABLE)
1. Remove the clear plastic cap that covers the motion
sensor installed on the fixture.
2. Twist to install the provided motion sensor lens onto
the fixture until secure.
Figure 7.
3/4” NPS Plug
(Provided in Packaging)
MAINTENANCE NOTE:
A REGULAR MAINTENANCE
SCHEDULE SHOULD BE FOLLOWED TO RETAIN OPTIMAL
LIGHT OUTPUT AND THERMAL PERFORMANCE. OPTICAL
LENS CLEANING SHOULD BE PERFORMED WITH A
CLEAN DRY CLOTH TO REMOVE ANY DUST OR OTHER
CONTAMINANTS. ADDITIONAL CLEANING CAN BE
PERFORMED WITH NON-ABRASIVE CLEANSER.