Eaton is a registered trademark.
All other trademarks are property of their
respective owners.
Installation instructions for Castell key
interlock kit IZM low voltage
circuit breakers
Eaton Industries GmbH
Hein-Moeller-Straße 7-11,
53115 Bonn,
Germany
Eaton.com
© 2022 Eaton Industries GmbH
All Rights Reserved
Printed in Germany
Publication No. IL0131196ENH01
Effective July 2022
Instructional Leaflet
IL0131196EN
Effective July 2022
Step 11:
Rotate the key
counterclockwise
to lock out interlock
as shown.
If an operations counter was previously removed in
Step 3
,
re-install it to the back of the new lock mounting plate using
two M3.5 x 8 mm self-tapping screws. Refer to IL0131174EN for
complete operations counter installation instructions.
Figure 11. Step 11
Step 12:
Re-install the front cover removed in
Step 1
. Key removal
is required to install the front cover. The key must be in place for
breaker operation.
Disclaimer of warranties and
limitation of liability
The information, recommendations, descriptions, and safety
notations in this document are based on Eaton Corporation’s
(“Eaton”) experience and judgment, and may not cover all
contingencies. If further information is required, an Eaton sales
office should be consulted.
Sale of the product shown in this literature is subject to the terms
and conditions outlined in appropriate Eaton selling policies or other
contractual agreement between Eaton and the purchaser.
THERE ARE NO UNDERSTANDINGS, AGREEMENTS,
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR
MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET
OUT IN ANY EXISTING CONTRACT BETWEEN THE PARTIES. ANY
SUCH CONTRACT STATES THE ENTIRE OBLIGATION OF EATON.
THE CONTENTS OF THIS DOCUMENT SHALL NOT BECOME
PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES.
In no event will Eaton be responsible to the purchaser or user in
contract, in tort (including negligence), strict liability, or otherwise
for any special, indirect, incidental, or consequential damage or loss
whatsoever, including but not limited to damage or loss of use of
equipment, plant or power system, cost of capital, loss of power,
additional expenses in the use of existing power facilities, or claims
against the purchaser or user by its customers resulting from the
use of the information, recommendations, and descriptions
contained herein.
The information contained in this manual is subject to change
without notice.
