2
iLumin Plus
www.eaton.com/lighting
Planning the Installation
TSE80-B is designed to be wall mounted or in either Portrait
or Landscape orientation.
TSE80-B requires a minimum mounting depth of 1in
(2.45cm) from the front wall surface plus room for cable/s.
Power is supplied by Power Over Ethernet (PoE). PoE must
meet the IEEE 802.3af standard. TSE80-B connects to the
local network via a hard wired Ethernet connection.
Overview
Back Box
TSE80-B
Mounting Bracket
PoE and Data Connection (RJ45)
Mounting Height
The recommend mounting height for the TSE80-B is
57 - 64in (145-165cm) above the finished floor to the center
of the unit.
57” / 145cm
64” / 165cm
Installation
TSE80-B has been designed to mount to a US NEMA 2
gang back box.
Installing Mounting Frame
TSE80-B includes a mounting frame that MUST be used for
this installation.
Using the included screws mount the mounting bracket
onto the back box and verify that the components are level
before tightening the captive screws on the TSE80-B.
Mounting the TSE80-B
Align the mounting frame hooks with the TSE80-B mounting
slots and gently pull the TSE80-B unit down the mounting
bracket.
Make sure the mounting hooks are properly engaged.
Using a precision phillips head screw driver, tighten the
2 captive screws (one at each side) to secure the TSE80-B
to the mounting bracket.
Power Connection
TSE80-B is designed to be powered over the Ethernet
connection (PoE).
