Eaton i-on30R, Administration And User Manual

Page: 62 / 68

User Menu Options
Page 58
To re-program the buttons on a remote control:
1. Select System Config
– Remotes – Edit
.
The following is displayed:


2. EITHER:
a) Press the button on the remote control you want to re-program.
Hold down the button until you see the transmit LED flash.
OR (if you do not have the remote control):
a) Press

at the "Press Remote Button" prompt.
b) Use

or

followed by

to select the remote control you
want to re-program.
c) The display lists the first button on the remote control:


d) Use

or

followed by

to select the button you wish to re-
program.
The top line of the display shows the identity of the remote control, the
button you pressed or selected, and the name of the owner. For
example:


3. Use

or

followed by

to choose the function for the button:
Part Set (Two-way remote control only.) To set part set B/C/D (part-
setting system), or to part set the partition assigned to the
remote control (partitioned system). For a part-setting
system, use

or

followed by

to select the part set.
Output To operate a user-defined output. Use

or

followed by

to select the output, then use

or

followed by

to
select the output mode:

On
– Switches the output on.

Off
– Switches the output off.