13
GREEN MOTION DC 44/66 EV CHARGER USER MANUAL
MN192005EN March 2023 www.eaton.com
6. Software suite
7. Maintenance
5.3 Emergency stop button
The Emergency stop button is located on the front door of the Green Motion DC 44/66 EV charger, as per Figure 1. Push
the button in case of emergency. The touchscreen display will show the screen shown in Figure 5 after the Emergency
stop button is pressed.
Figure 5. Touchscreen display when Emergency stop button is pressed
Green Motion DC 44/66 EV charger works in combination with an advanced software called Charging network manager.
This is an all-in-one software management system designed to control the charging stations network. Refer to the Eaton
Charging network manager user manual, available on www.eaton.com, for further details.
Installation, commissioning, maintenance or retrofitting of the charging station must be performed by
professional and qualified personnel who are responsible for complying with existing standards and local
installation regulations.
Before starting connection operations, make sure that the external AC-line main switch is disconnected, and
circuit breakers are open.
Any operation requires opening the housing of the EV charger can lead to electric shock hazards.
In case the unit shows a failure and the emergency stop button is pushed, check the integrity of the unit,
cables and connectors before starting the maintenance process.
Opening of the EV charger as well as any configuration changes must be carried out by professional and
qualified personnel in accordance with the local safety and electrical regulations and laws.
Before carrying out any maintenance on the unit, disconnect the unit from the power supply and wait at least
ten minutes to allow its components to cool down and any static electricity storage devices to discharge.
The enclosure could overheat during its operation or be heated by direct sunlight, and it can cause burns by
contact. To avoid burns, please use suitable PPE or wait for the equipment to cool down before accessing it.
Before deactivating the Emergency stop button, make sure that the EV charger is safe to operate.
To release the emergency stop button, rotate it to the right.
