SOFTWARE UPDATES
The latest software version can be located on the Maintenance
screen when logged in as an admin user.
Check
eatoncrimpersupport.com
to verify that you have the
latest software revision on the machine. Software update
instructions can be found in the operator’s manual. A USB
drive is required and is included with the machine. It is located
in a cardboard box along with a stylus and wiping cloth. The
box is taped to the inside of the white pusher on the machine.
Note that the USB port is located on the right side of the
machine and has a black cover.
CALIBRATION
The FT1380e crimp machine will come pre-calibrated from
the factory. Please perform a calibration check to verify these
factory settings prior to use. Calibration instructions can be
found in the operator’s manual.
TECHNICAL SUPPORT
To access a PDF version of the operator’s manual and other
technical documents and support materials for the FT1380e
crimp machine, point the camera on your mobile device to the
QR code below or visit
eatoncrimpersupport.com/ft1380e
.
ADMIN FUNCTIONALITY
The FT1380e machine has administrative capabilities that can
only be performed by an administrator. This includes the ability
to set and view the machine calibration settings, set user
access privileges, and to access machine setting details such
as software revision number and crimp count.
© 2021 Eaton
All Rights Reserved
Printed in USA
Document No.: E-HOAS-TT007-E
Eaton
Hydraulics Group USA
14615 Lone Oak Road
Eden Prairie, MN 55344
USA
Tel: 952-937-9800
Fax: 952-294-7722
www.eaton.com/hydraulics
OPERATOR’S MANUAL
IMPORTANT!
Read through the operator’s manual in its entirety prior to operation of the machine. Pay special attention to all
warnings and safety instructions.
Use the QR Code below to access the operator’s manual and other technical documents on
eatoncrimpersupport.com
or access via the URL –
eatoncrimpersupport.com/ft1380e
.
The manual can also be accessed on the FT1380e by selecting the
Help icon on the touch screen.
To log into the machine as an administrator, select the
key
icon at the bottom right of the screen.
Then, enter the Admin password using the keypad.
SOFTWARE VERSION
HELP FEATURE INCLUDING
OWNER’S MANUAL
ADMIN LOGIN
