3
Operation
Start-up and Power Down
Start-up
1.
Turn the ignition key to “ON” and allow the AutoShift to power-up.
2.
Depress the clutch pedal.
•
Engine cranking is delayed until the transmission power-up is
complete and the gear display shows a solid “N”.
3.
Start the engine.
4.
Apply service brake.
5.
Release the clutch pedal to register proper input shaft speed.
6.
Depress clutch pedal.
7.
Select the desired mode and starting gear, on the shift console.
8.
Release the vehicle parking brakes.
9.
Release service brake.
10. Release the clutch pedal to begin vehicle movement.
Power Down
1.
Select Neutral on the shift control.
•
If gear display does not show solid “N”, neutral has not yet been
obtained.
2.
Set the vehicle parking brakes.
3.
Turn off the ignition key and allow the engine to shut down.
Summary of Contents for FO-6406A-ASX
Page 21: ......