10
Operation
Transmission Power Take Off
Stationary PTO Operation
The transmission countershaft PTO is used in this application.
To engage the PTO for stationary operation perform the following steps:
1.
Apply the parking brake.
2.
Select “D” on the Shift Control (this stops countershaft rotation for
PTO engagement).
3.
Select the transmission PTO switch.
4.
Select “N” on the Shift Control.
5.
Raise engine speed up to specified minimum speed required to
engage clutch and operate PTO.
Mobile PTO operation
The Transmission countershaft PTO is used in this application, and provides
limited mobile operation in the starting gears.
To engage the PTO for mobile operation perform the following steps:
1.
Depress the service brake.
2.
Release the parking brake.
3.
Select “MANUAL” on the Shift Control (this stops countershaft rota-
tion for PTO engagement).
4.
Select the transmission PTO switch.
5.
Select “MANUAL”, “Neutral” or, “Reverse”, as required for vehicle
movement.
6.
Release the service brake.
7.
Raise the engine speed up to specified minimum speed required to
engage clutch and move vehicle/operate PTO.
Split shaft PTO Operation (stationary only)
To engage the transmission for split shaft operation perform the following
steps:
1.
Select “D” on the Shift Control.
2.
Select PTO switch.
Summary of Contents for FO-6406A-ASX
Page 21: ......
