For more information visit:
www.EatonElectrical.com
Programming wiring
MN05013005E
172
Data block transfer
EZD is provided with 32 function blocks BT01 to BT32 for
transferring values from one marker range (Copy data). The
marker ranges can be overwritten with a particular value (data
initialization). The following marker types can be transferred
and overwritten:
• MB,
• MW,
• MD.
The function block is enabled in the circuit diagram.
Figure 99: EZD circuit diagram with enabling of transfer data block
function block
Parameter display and parameter set for a data block transfer
function block:
Only constants can be modified in the parameter display of a
function block.
I 05--------------------------Ä BT07T_
BT07E1o
BT07E2s
BT07E3j-----------------------Ä M 42
BT07 INI
+
>I1
>I2
>NO
BT07
Data block transfer function block number 07
INI
INI mode, initialize marker ranges
+
Appears in the parameter display
>I1
Source range start
>I2
Destination range start
>NO
Number of elements to be written in bytes per range.
Value range 1 to + 383
