General Information
Cautions, Warnings, and Notes
Failure to follow indicated procedures may cause compo-
nent damage or malfuction.
Failure to follow indicated procedures
creates a high risk of personal injury to the service
technician.
Note:
Additional relevant information not covered
in the service procedure.
Operational Warnings
Before starting a vehicle:
1.
Sit in the driver’s seat.
2.
Place the vehicle in neutral.
3.
Set the parking brake.
4.
Disengage the clutch.
Before working on the vehicle or leaving the cab with the
engine running:
1.
Place the vehicle in neutral.
2.
Set the parking brake.
3.
Block the wheels.
Do not operate the vehicle if the alternator lamp is lit or if
the gauges indicate low voltage.
Repair Warnings
Disconnect the vehicle’s battery before removing or
installing electronic parts.
When disassembling various assemblies, lay all parts on
a clean bench in the same sequence as removed to sim-
plify and reduce the possibility of losing parts.
Use of other than recommended tools, parts, and instruc-
tions listed in this manual may place the safety of the ser-
vice technician or vehicle driver in jeopardy.
The location of some components may vary with each
OEM.
The removal and installation procedure described for
each component may vary for your vehicle.
Always use genuine Eaton replacement parts. For a com-
plete list of approved and reputable dealers, write to:
Eaton Corporation
Truck Component Marketing Headquarters
P.O. Box 4013
Kalamazoo, MI 49003
Every effort has been made to ensure the accuracy of the
information contained in this manual. However, Eaton
Corporation makes no warranty, expressed or implied,
based on the information provided.
CAUTION
WARNING
WARNING
General Information
