![background image](http://html.mh-extra.com/html/eaton/epdu-g3/epdu-g3_operation-manual_524480027.webp)
Installation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1
www.eaton.com/ePDU
19
Figure 16. Securing the ePDU
Using Mounting Buttons Installed on Clip Feet
To install the ePDU with mounting buttons installed on the mounting clip feet:
1.
Locate the two mounting clip feet, M6 flathead screws, two spare plastic mounting buttons, and
mounting hardware (M4 screws and M4 hex nuts). Using a Phillips screwdriver, assemble the mounting
buttons and clip feet (see Figure 17).
Figure 17. Attaching the Mounting Buttons to the Mounting Clip Feet