![background image](http://html.mh-extra.com/html/eaton/epdu-g3/epdu-g3_operation-manual_524480023.webp)
Installation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1
www.eaton.com/ePDU
15
You can install one or two In-line Metered (IL) models horizontally (see Figure 8).
=
=
Figure 8. Horizontal Model Configurations
Power Feed Labels
Adhesive power feed labels (red power feed arrow and blue power feed arrow) are supplied to allow
identification of the power flow for up to two individual ePDUs. The customer can choose the location of the
sticker in an available space on the unit or the rack. Adhere one to the side of an ePDU at your discretion to
indicate the power feed direction (see Figure 9).
Figure 9. Power Feed Labels
Chassis Hole Pattern (European models only)
The European models have markings and extra holes on the back of the ePDU to accommodate different
mounting requirements in European racks.