![background image](http://html.mh-extra.com/html/eaton/epdu-g3/epdu-g3_operating-manual_524483070.webp)
LCD Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5
61
Figure 66. Example Load NMC File
Upgrade the eNMC Module Firmware using USB
To upgrade the eNMC module firmware:
1.
Go to www.eaton.com/ePDU.
2.
Enter the ePDU part number of your model in the ePDU Part Number Search field and click
Search
.The
product Web page displays.
1.
Select the
Options
tab and click either the ePDU Firmware link or the free download link. The Download -
ePDU Software Tools and MIBs page displays.
2.
Click the link to the firmware upgrade file for your model in the column named ePDU Firmware (Advanced
Monitored, Switched, and Managed ePDUs) and save the file to your computer.
3.
Connect a USB drive to your computer and put the Image*.bin file in the eNMC/upgrade/ location on the
USB drive root directory (see Figure 67).
Figure 67. Root Directory of Flash Disk
4.
Make sure eNMC module is powered ON.
5.
Insert the flash drive in the USB port of the eNMC front panel.
NOTE 1
The eNMC/upgrade/hw directory contains only one file named epdu_cfg*.xml.
NOTE 2
The epdu_cfg*.xml file shall be compatible with the ePDU part number.
NOTE
The file is named Image*.bin.
NOTE
There can only be one Image*.bin file in the eNMC/upgrade directory on your USB
drive.
Daisy Chain
Settings
LCD
IPv4
Factory
Display
Language
ESC
Enter
Main Menu
Active Alarms
Alarms History
Meters
Control
ePDU Info
Main Menu
Settings
Enter
ESC
USB Flash Mode
Main Menu
.
Upgrade F/W
Exit
USB Flash Mode
Save Config
.
Load Config
Save eNMC file
Load eNMC file