![background image](http://html.mh-extra.com/html/eaton/epdu-g3/epdu-g3_operating-manual_524483065.webp)
LCD Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5
56
Control Menu
For Switched (SW) and Managed (MA) ePDUs only.
On the Main Menu, scroll up or down to highlight
Control
. Press
ENTER.
Scroll up or down to see a list of outlet group IDs. Select an outlet group. The On/Off
drop down list displays. Select On or Off. The selected state of the outlet displays. Scroll up or down to see
other lists of outlet group IDs (if available). Press
ESC
to return to the previous menu (see Figure 57).
Figure 57. Example Control Submenu Display
Settings Menu
The Settings menu provides user configuration options. Only the available options display, depending on the
assigned user privileges.
There are five standard Settings submenus and one optional submenu:
l
USB Flash mode (only available if the USB device is detected)
l
Display
l
Daisy Chain
l
Language
l
IPv4
l
Factory
On the Main Menu, scroll up or down to highlight
Settings
. Press
ENTER.
Scroll up or down to select a
submenu and press
ENTER
to display the submenu options. Press
ESC
to return to the previous menu.
Figure 58. Example Settings Menu Display
ESC
Enter
Enter
Main Menu
Active Alarms
Alarms History
Meters
Control
Settings
Main Menu
Control
ePDU Info
Main Menu
A1 On
A2 On
A3
A4
A5 On
Control
A3
On
On
Off
Main Menu
B1 On
B2
B3
B4 On
B5 On
Control
B2
On
On
Off
Daisy Chain
Settings
LCD
IPv4
Factory
Display
Language
ESC
Enter
Main Menu
Active Alarms
Alarms History
Meters
Control
ePDU Info
Main Menu
Settings