![background image](http://html.mh-extra.com/html/eaton/epdu-g3/epdu-g3_operating-manual_524483040.webp)
Installation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5
31
2.
How many ePDUs are you daisy-chaining?
l
If daisy-chaining two ePDUs (1+1), go to Step 3
l
If daisy-chaining three ePDUs or more (2+1 to 7+1), go to Step 5
3.
Connect one end of the cable to the Daisy Chain connector on one ePDU. Connect the other end of the
cable to the Daisy Chain connector on the other ePDU as shown in Figure 29.
4.
Go to Step 7 to configure the daisy-chained ePDUs.
Figure 29. Locating the Daisy Chain Connector
5.
Insert a Y splitter in the Daisy Chain connector for all ePDUs between the Host and the last ePDU in the
chain, as shown in Figure 29 and Figure 30.
6.
Go to Step 7 to configure the daisy-chained ePDUs.
Device [1]
2 Daisy Chain Ports Connected
(No Splitter Needed)
Network Connection
(Ethernet Port)
Host [0]
Device [2]
Device [3]
4 Daisy Chain Ports Connected
(Two Splitters Needed)
Network Connection
(Ethernet Port)
Device [1]
Host [0]
Device [1]
Device [2]
3 Daisy Chain Ports Connected
(One Splitter Needed)
Network Connection
(Ethernet Port)
Host [0]
Device [1]
Device [2]
Network Connection
(Ethernet Port)
Device [3]
Device [4]
Device [5]
Device [6]
Device [7]
8 Daisy Chain Ports Connected
(Six Splitters Needed)
Host [0]
7+1 Daisy-Chaining
3+1 Daisy-Chaining
2+1 Daisy-Chaining
1+1 Daisy-Chaining