![background image](http://html.mh-extra.com/html/eaton/epdu-g3/epdu-g3_operating-manual_524483023.webp)
Installation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5
14
!
IMPORTANT
Follow all installation and operation safety information provided in the manufacturer’s instruction
manual for the EMP equipment. Use only supplied accessories.
Brackets for Cisco Racks (US only)
Brackets are available for installing ePDU
s
in Cisco racks (US only). The brackets are sold in either individual or
bulk volume kits (see “Ordering Optional and Spare Parts” on page 135).
The individual kit includes two brackets, mounting hardware (screws and KEPS nuts), and an installation
diagram (see Figure 7). The same parts are provided in the bulk volume kit, but the number provided depends
on how many mounting units are ordered.
Figure 7. Mounting Bracket and Clip feet for Cisco Racks
NOTE
In addition to the brackets and mounting hardware provided, you will use the clip
feet that are provided in the ePDU shipping carton to mount the ePDU in a Cisco
rack. See for “Using Mounting Brackets for Cisco Racks (US only)” on page 23 for
installation instructions.
Two Brackets, 8-32 and 10-32 Screws, Two keps Nuts
Provided in kits
Two Clip Feet
Shipped with ePDU