Eaton eNMC2 User Manual Download Page 37

Page: 37 / 231

Controls

Contextual help of the web interface – 37

•

•
•

•

Safe reboot

This will shut off and then switch ON the load. Protected applications will be safely powered down.

This control is available only if the status is not OFF and if there are no active commands running.

Switch ON

This will switch ON the load or turn ON the online UPS.

This control is available when the status is OFF, if there are no active commands running and if the Online UPS is on bypass.

3.4.1.3 Pending action

Displays the delay before shutdown and delays before startup.

3.4.2 Outlets - Group 1/ Group 2

Load segmentations allow, battery runtime to remain on essential equipment and automatically power down non-priority equipment
during an extended power outage.

This feature is also used for remote reboot and the sequential start of servers to restrict inrush currents.

3.4.2.1 Status

It reflects the current outlet status.

On — Protected/Not protected
Off — Not powered

3.4.2.2 Commands

A set of commands are available and activated when one of the following buttons is pressed. A confirmation window appears.

Safe OFF

This will shut off the load connected to the associated load segment. Protected applications are safely powered down.

This control is available only if the status is not OFF and if there are no active commands running.

Safe reboot

This will power down and then switch ON the load connected to the associated load segment. Protected applications are
safely powered down.

This control is available only if the status is not OFF and if there are no active commands running.

Switch ON

This will switch ON the load connected to the associated load segment.

This control is available when status is OFF and if there are no active commands running.

Summary of Contents for eNMC2








































































































































































































































Search results

Summary of Contents for eNMC2

Reviews:

Eaton eNMC2, User Manual, Page: 37 / 231

Search results

Summary of Contents for eNMC2

Reviews: