28
Operation
Transmission Oil Display Message
The transmission contains a fluid pressure sensor that monitors the transmis-
sion oil lubrication system pressure. If the sensor indicates a low oil condition
to the Transmission Control Module (TCM) a transmission low oil message is
displayed and an audible tone may be emitted.
If the transmission low oil message is displayed, perform the following as soon
as possible or transmission damage may occur:
1. Continue to drive the vehicle to the nearest safe location.
2. Select Neutral (N) mode using the transmission driver interface device.
3. Set the vehicle parking brake.
Note:
Gear display indicators, messages, and tones will vary based on how
the transmission system features and functions are configured in the
Transmission Control Module (TCM) and how the OEM has implemented
them. Refer to OEM for more information on the dashboard display.
Note:
This feature is configured in the TCM with ServiceRanger.
WARNING:
Apply vehicle parking brake and follow OEM parking instruc-
tions. Failure to follow these instructions could cause unintended vehicle
movement and may result in major vehicle component damage, property
damage, severe injury or death.
4. Turn ignition key to Off and allow the engine to shut down.
5. Contact a service facility to have the transmission system evaluated.
!
