background image

2

Edison™ Single-Phase Vacuum Capacitor Switch

InstallatIon and operatIon InstructIons

   MN230007EN   February 2017

Ratings and specifications

Check switch ratings before installation

The Edison capacitor switch must be applied within its 

specified ratings. Check data plate ratings and compare with 

the system characteristics at the point of application prior to 

installation. Table 1 list the ratings and specifications for the 

Edison capacitor switch.

Ratings

All ratings meet or exceed values in IEEE Std C37.66™-2005 

standard for a distribution-class switch, where applicable.

Table 1 .  Ratings and specifications

Voltage class

Switch type

15 kV

ECS15-95

ECS15-125

25 kV

ECS25-125

ECS25-150

Rated maximum voltage, 50/60 Hz 

Ungrounded capacitor banks, L-L (kV)

15.6

15.6

25

15.6

Solidly grounded capacitor banks, L-L (kV)

15.6

27

25

38

Impulse withstand voltage

Open contact kV (BIL)

95

95

125

125

Line to ground (kV BIL)

95

125

125

150

Withstand voltage, 60 Hz

Power Frequency Dry Withstand (kV)

60

60

60

70

Power Frequency Wet Withstand (kV)

50

50

50

60

Continuous current 50/60 Hz (A)

200

200/400

200

200

Capacitive switching current 50/60 Hz (A)

200

200/400

200

200

Fault making peak current (A)

15,000

15,000

15,000

15,000

Symmetrical fault making current (A)

6,000

6,000

6,000

6,000

Withstand peak current (A)

15,000

15,000

15,000

15,000

Short-time symmetrical withstand current (A)

4,500

4,500

4,500

4,500

High frequency transient making peak current (A)

9,000

9,000/12,000 

*

9,000

9,000

Rated transient inrush frequency (Hz)

6,000

6,000

6,000

6,000

Creepage distance

Terminal to terminal (mm)

440

600

813

813

Terminal to ground (mm)

498

610

610

813

Operating voltage range, 50/60 Hz 

**

110/120 Vac (V)

75 – 130

75 – 130

75 – 130

75 – 130

240 Vac (V)

150 – 260

150 – 260

150 – 260

150 – 260

Nominal control current

110/120 Vac for 100 msec (A)

9

9

9

9

240 Vac for 100 msec (A)

6

6

6

6

Weight (lb/kg)

32/14

33/15

33/15

34/16

Operating temperature range

-40 °C to +60 °C

-40 °C to +60 °C

-40 °C to +60 °C

-40 °C to +60 °C

Mechanical operations

50,000

50,000

50,000

50,000

 

*

 

The 15.6 kV rated Edison Capacitor Switch is available with an optional High Frequency Transient Making Peak Current of 12 kA. Contact factory for additional information.

 

** Contact factory for more information regarding dc control voltages.

otee:

N

The durability of the Edison capacitor switch was demonstrated by completing a minimum of 50,000 mechanical 

operations after performing the Mechanical Life Test in accordance with IEEE Std C37.66™-2005 standard. One 

operation is defined as one close and one open operation. 

Summary of Contents for Edison Cooper Power Series













Reviews: