EC500 Controller Handbook
Copyright © 2019 Eaton Corporation. All Rights Reserved.
Issue A March 2019
Page 61 of 107
Parameter
Description
Where to find:
Battery Current
Charge kWh
Discharge kWh
kAh
kWh
Current used in calculating an individual battery path
energy meter power.
Battery charge energy measured.
Battery discharge energy measured.
Capacity of battery bank.
Energy measured as per battery bank.
Menu>System
Status>Battery
Web:
Menu>System
Status>Battery
AC Voltage
AC Current
AC kWh
R, Y and B phase voltage of AC Source Type (EB or
DG) calculating its individual energy meter power.
R, Y and B phase current of AC Source Type (EB or
DG) calculating its individual energy meter power.
Calculate cumulative energy
Display
Menu>System Status>AC
Input
Web:
Menu>System Status>AC
Input
CONFIGURATION
Set the following parameters.
Parameter
Description
Where to find:
AC Energy Meter
Status
AC Energy Meter
Type
Enable the status of AC Energy Meter
Select the type of AC Energy Meter, Internal or
External
Display:
Menu>System Config>AC
Config>
Web:
Menu>System Config>AC
Config
Battery Energy
Meter Status
No. of Battery LVD
Enable the status of Battery Energy Meter
Select the number battery LVD.
Display:
Menu>System Config>DC
Config>Batt Config
Web:
Menu>System Config>DC
Config>Batt Config
Load Energy Meter
Status
Load Energy Meter
Type
No of Load Paths
No of Load LVD
Enable the status of Load Energy Meter
Select the load energy meter type, Internal or
External.
Select the number of Load paths as per load strings.
Select number of load LVDs as per system
configuration.
Display:
Menu>System Config>DC
Config>Load Config
