Eaton Small External Battery Cabinet (EBC-S)
and Large External Battery Cabinet (EBC-L)
User’s and Installation Guide
© Eaton Corporation plc 2015. All rights reserved.
Revision: 002
Document ID: P-164000504
20 (37)
The following 24V shunt-release with early-make auxiliary contact is
used with the above circuit breakers:
TYPE
ARTICLE No
NZM1-XAHIVL24AC/DC
259792
(P-152001062)
3.3
Unpacking and unloading the EBC
WARNING
The external battery cabinet is heavy. If the unpacking instructions are
not closely followed, the cabinet may tip over and cause serious injury.
Do not tilt the cabinet more than 10 degrees from the vertical or the
cabinet may tip over.
For transportation purposes, the battery cabinet is bolted onto a wooden
pallet. To remove the pallet, perform the following procedure:
1.
Before you unload the cabinet
from the pallet, use a forklift or
other material handling
equipment to move the cabinet
to the installation area. Insert
the forks of the forklift between
the skids on the bottom of the
unit.
Summary of Contents for EBC-S
Page 36: ......