50
645M 4G/LTE CELLULAR ROUTER
MN032003EN March 2017 www.eaton.com
645M IPsec client configuration
Figure 52 . IPsec configuration page
Step 1
From the laptop connected to the LAN port of the
ELPRO 645M, ping the remote IP Address. The pings
should receive replies.
Step 2
Open a Web browser on the connected laptop and
navigate to the 645M Web interface.
Step 3
From the main navigation pane, select
Security
, and
from the Security page, select the
IPsec
tab.
Step 4
Select a name for the IPsec tunnel and enable it by
checking the Enable box.
Step 5
IPsec tunnel configuration information for the tunnels.
Select a tunnel to configure by entering its name in
the
Name
field. Current values for that tunnel are
displayed. Changes do not take effect until you click
Save & Apply
.
After the page refreshes, the tunnel configuration will appear in
the Tunnel Table at the bottom of the tab
5 IPsec and VPN pass-through deployment guide
