Eaton easySafety, Manual

Page: 93 / 695

The first circuit diagram
89
02/16 MN05013001Z EN
Wiring
A easySafety device displays a small arrow
l
in the standard
circuit diagram and in the safety circuit diagram when
creating the wiring.
Press ALT to activate the wiring arrow cursor and use the
cursor buttons
Í Ú ú í
to move it. Pressing ALT once more
switches the cursor back to Move mode.
The wiring arrow works between contacts and relays. When
you move the arrow onto a contact or relay coil, it changes
back to the cursor and can be reactivated if required.
X
Press ALT to wire the cursor from
IS02
through to the
coil field.
The cursor changes into a flashing wiring arrow and
automatically jumps to the next logical wiring position.
X
Press the cursor button
í
. Contact
IS02
will be
connected up to the coil field.
X
Press the cursor button
í
again.
The cursor will move to the coil field.
h
ALT also has two other functions depending on the cursor
position:
• In the left contact field, you can press ALT to insert a
new empty circuit connection.
• The contact under the cursor can be changed between
a make and break contact by pressing the ALT button.
ÊÊÊÊÊÊÊ
-
ÊÊÊÊÊÊÊ
-
ÊÊÊÊlÊÊ
-
ÊÊÊÊÊÊÊ
-
ÊÊÊÊÊÊÊ
-
ÊÊÊÊÊÊÊ
-
L: 1 C:1 B:7732
M
l
L
m
h The easySafety device automatically connects adjacent
contacts up to the coil.
-IS02
l
L: 1 C:3 B:7732
h You can use DEL to erase a connection at the cursor or
arrow position. Where connections intersect, the vertical
connections are deleted first, then, if you press DEL again,
the horizontal connections are deleted.