ea
s
ySafety Settings
580
02/16 MN05013001Z EN
Sealing the safety configu-
ration
The safety configuration is a part of the configuration. It
consists of:
• the safety circuit diagram and its startup behaviour.
• the permission to overwrite from the card
• master and safety password.
X
Press DEL and ALT to call up the System menu.
X
Choose here S PARAMETERS -> SYSTEM -> S SEAL.
OK seals the safety configuration, ESC breaks the process
and returns you to the menu.
The safety configuration and its system parameters are not
protected from unwanted changes but can still be viewed. If
modifications are required after sealing, a new safety config-
uration must be entered or loaded.
The sealing function has no effect on the standard configu-
ration.
h
If it is necessary to prevent the changing of a created
safety configuration that has been tested and found to be
correct and valid, it can be sealed and thus protected from
any change.
SEALING IS
NOT REVERSIBLE!
OK->ACTIVATE
ESC->CANCEL
Summary of Contents for easySafety
