Eaton easyControl EC4-200, User Manual

Page: 75 / 113

10/10 MN05003003Z-EN
Setting the master station
71
Setting the master station
Define two node IDs in the master station:
• One ID for routing
• One ID for basic communication
for the routing function:
Set the routing ID and the CAN baud rate in the CAN/easyNet tab
of the Configuration folder as shown in figure 85.
For basic communication:
The ID for basic communication and the CAN baud rate are
defined in the CanMaster folder in the CAN parameters tab in
figure 86.
Setting the device station
Define two node IDs in the device (target) station:
• One ID for the routing function: The routing ID and the CAN
baud rates are set as shown in figure 85 in the CAN/easyNet
tab. As node ID set for example “54”.
• One ID for basic communication: The ID for basic
communication and the CAN baud rate are defined in the Can
settings folder as shown in figure 87.
Node ID and baud rate are transferred with the project download.
Figure 85: CAN Master routing settings
Figure 86: CAN Master, ID for basis communication
Figure 87: CAN device parameters