Eaton EASY-RTD-DC-43-03B1-00, Manual, Page: 71 / 91

7. Make Connection
7.1 easyE4 with the easy-RTD
/
Fig. 31: Remoteeasy-RTD
Tapping the SEL button will select the IP address that is currently highlighted
in the list and exit the page.
The selected IP address will now be in the address field.
7. Tap the Connect button to establish a connection to the selected easyE4
/
Fig. 32: Remote easy-RTD
The content of the easyE4 display and its controls will be automatically duplic-
ated on the easy-RTD.
The easyE4 can be controlled from this view, provided that remote display
access permissions are configured correctly in the easyE4. → "Remote Display
-access inhibit", page 73
In addition, you can tap and hold the display to switch between the view with
control buttons and full screen mode.
easy Remote Touch display 06/21 MN048027EN Eaton.com
71