Eaton DX RT 6K UPS, User Manual

Page: 29 / 56

22
Reset fault status Clears active fault
Clear event log Clears events
Restore factory set Returns all settings to original values
Settings Sets parameters
Event log Event list
Identification [Product type/model] / [Part/Serial number] /
[UPS/NMC firmware]
5.4 User settings
The following table displays the options that can be changed by the user.
Submenu Available settings Default settings
Password Key the password USER
language [English][Deutsch][Español] English
User
password [disabled] [Enabled] [disabled]
Audible alarm [enabled] [disabled] [enabled]
Output voltage [208V] [220V] [230V] [240V]
Can be changed in Standby mode and
Bypass mode
[230V]
Output
frequency [autosensing] [50HZ][60HZ] [autosensing]
Power
strategy [normal] [high efficiency] [converter] [normal]
Auto bypass [enabled] [disabled] [enabled]
Auto restart [enabled] [disabled]
Authorize the product to restart
automatically when mains recovers after
a complete battery discharge. [enabled]
Dry in [Disabled] [SON] [SOFF] [Maintain
bypass] [Disabled]
Dry out [Load powered] [On battery mode]
[Battery low] [Battery disconnected]
[Bypass output] [UPS normal] [Load powered]
Start on
battery [enabled] [disabled]
[enabled]