background image

DCF-3000 Installation, Operation & Maintenance 

 

DOM0000007, Revision A 

Page 7 of 7 

 

D

 

Reduction in flow rate or high differential pressure 

1

 

Cleaning interval set too long 

a

 

Decrease cleaning timer setting 

2

 

Purge interval set too long 

a

 

Decrease purge timer setting 

3

 

Purge valve not functioning 

a

 

Inspect and replace purge valve 

4

 

Dirty or damaged filter screen 

a

 

Inspect and clean or replace filter screen 

5

 

Flow, viscosity or solids increase 

a

 

Consult factory 

6

 

Cleaning disc not properly cleaning element 

a

 

Inspect cleaning disc for wear and replace if 
necessary 

E

 

Drop in filtrate quality 

1

 

High differential pressure 

a

 

Refer to reduction in flow rate or high differential 
pressure above 

2

 

Improper Assembly 

a

 

Confirm the Element Hold-Down plate is properly 
installed 

3

 

Damaged filter screen O-rings 

a

 

Remove and replace with factory element screen O-
rings 

4

 

Damaged filter screen 

a

 

Remove and replace with factory filter screen 

5

 

Filter screen too coarse 

a

 

Consult factory for ability of filter system to accept 
finer screen retention. Remove and replace with 
factory filter screen. 

Warranty  

WARRANTY 

All products manufactured by Seller are warranted against defects in 

material and workmanship under normal use and service for which such 

products were designed for a period of eighteen (18) months after 

shipment from our factory or twelve (12) months after start up, whichever 
comes first. OUR SOLE OBLIGATION UNDER THIS WARRANTY IS TO 

REPAIR OR REPLACE, AT OUR OPTION, ANY PRODUCT OR ANY 

PARTS OR PARTS THEREOF FOUND TO BE DEFECTIVE. SELLER 

MAKES NO OTHER REPRESENTATION OR WARRANTY, EXPRESS 

OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED 

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE. WE SHALL NOT BE LIABLE FOR CARTAGE, 
LABOR, CONSEQUENTIAL DAMAGES OR CONTINGENT LIABILITIES. 

OUR MAXIMUM LIABILITY SHALL NOT IN ANY EVENT EXCEED THE 

CONTRACT PRICE FOR THE PRODUCT. 

If you are interested in ordering spare parts or having service 
performed on your filter, please contact Customer Service.  

Eaton reserves the right to change specifications, dimensions and model 
designations without prior notice. 

 

 
 
 
 
 
 
 

Contacts

 

North America - HQ 

44 Apple Street, 
Tinton Falls, NJ 07724 
Toll Free: 800 656-3344 
(North America only) 
Voice: +1 732 212-4700 
 
 

Europe/Africa/Middle East 

Auf der Heide 2 
53947 Nettersheim, Germany 
Voice: +49 2486 809-0 

 
Internormen 

Product Line 

Friedensstraße 41 
68804 Altlussheim, Germany 
Voice: +49 6205 2094-0 

 
Begerow 

Product Line 

An den Nahewiesen 24 
55450 Langenlonsheim, Germany 

 

China 

No. 7 Lane 280 Linhong Road, 
Changning District, 
Shanghai 200335, China 
Voice: +86 21 5200 0422 
 
 

 
Singapore 

4 Loyang Lane #04-01/02 
Singapore 508914 
Voice: +65 6825 1668 

 
 
 
Brazil 

Av. Julia Gaioli, 474 - Bonsucesso 
07251-500 – Guarulhos Brazil 
Voice: +55 11 2465 8822 
 

 

For more information, please e-mail us at 

[email protected] 

or visit

 www.

eaton.com/filtration 

 

 

© 2015 Eaton Corporation. All rights reserved. All 
trademarks and registered trademarks are 
the property of their respective owners.  
All information and recommendations appearing in this 
brochure concerning the use of products described herein 
are based on tests believed to be reliable. However, it is the 
user’s responsibility to determine the suitability for his own 
use of such products. Since the actual use by others is 
beyond our control, no guarantee, expressed or implied, is 
made by Eaton as to the effects of such use or the results to 
be obtained. Eaton assumes no liability arising out of the 
use by others of such products. Nor is the information herein 
to be construed as absolutely complete, since additional 
information may be necessary or desirable when particular 
or exceptional conditions or circumstances exist or because 
of applicable laws or government regulations. 

 

 
 

 

Summary of Contents for DCF-3000








Reviews: