Operations and Maintenance Manual
for Eaton Pressure Filters, Change-Over
DA/EDA 103,253,403,633,1003, related specification
Sheet No.
67630-4D
Page 4/4
North America
44 Apple Street
Tinton Falls, NJ 07724
Toll Free: 800 656-3344
(North America only)
Tel: +1 732 212-4700
Europe/Africa/Middle East
Auf der Heide 2
53947 Nettersheim, Germany
Tel: +49 2486 809-0
Friedensstraße 41
68804 Altlußheim, Germany
Tel: +49 6205 2094-0
An den Nahewiesen 24
55450 Langenlonsheim, Germany
Tel: +49 6704 204-0
China
No. 3, Lane 280,
Linhong Road
Changning District, 200335
Shanghai, P.R. China
Tel: +86 21 5200-0099
Singapore
100G Pasir Panjang Road #07-08
Singapore 118523
Tel: +65 6825-1668
Brazil
Av. Ermano Marchetti, 1435 -
Água Branca, São Paulo - SP,
05038-001, Brazil
Tel: +55 11 3616-8461
For more information, please
email us at
or visit
www.eaton.com/filtration
© 2019 Eaton. All rights reserved. All trademarks and
registered trademarks are the property of their respective
owners. All information and recommendations appearing in
this brochure concerning the use of products described
herein are based on tests believed to be reliable. However,
it is the user’s responsibility to determine the suitability for
his own use of such products. Since the actual use by
others is beyond our control, no guarantee, expressed or
implied, is made by Eaton as to the effects of such use or
the results to be obtained. Eaton assumes no liability
arising out of the use by others of such products. Nor is the
information herein to be construed as absolutely complete,
since additional information may be necessary or desirable
when particular or exceptional conditions or circumstances
exist or because of applicable laws or government
regulations.
EN
11-2019
6. Pressure difference measuring
If the filter assembly includes a clogging indicator, the indicator will measure the pressure difference
across the filter element. The method of pressure reading varies depending on the type of indicator
installed. It can be a visual, visual-electric or electronic reading. Additionally, the G ¼" (BSPP ¼")
connections from the switchgear can be used for external pressure gauges. Measuring connections
are recommended on data sheet 1650.
7. Special applications
This filter can be used in the special applications listed below. Please follow the instructions if you are
operating the filter in these environments.
Operation in explosive areas
WARNING:
There are additional requirements for filters that are installed in explosive
areas. Please follow the instructions on Eaton Document No. 41269.
FAILURE TO
FOLLOW THIS WARNING COULD LEAD TO DEATH, SEVERE INJURY, OR
PROPERTY DAMAGE.
8. Service
For product technical support and service, please contact the local Eaton support team. All locations
and contact information are listed below.
Order spare parts and wearing parts according to the spare parts list on the filter data sheet.
