Page 6
SV9IOC105
Series 9000
Cutler-Hammer
Document Number: IL.08H.02.T.E
Rev. 01, September 2000
J
Connect the power cable (5) to terminal X2
of the option board.
K
L
Snap the two terminal blocks (4) into place,
one each to the right and left of the I/O
board terminals.
Wire the terminals per application
requirements.
M
Re-attach the control panel base with the
four screws.
N
Attach the insulator sticker (7) on the inside
of the drive cover as shown.
O
Remove all foreign objects from inside the
drive and fasten the cover to the drive.
P
Replace the keypad.