Eaton Cutler-Hammer SV9IOC105, Instruction Sheet, Page: 5 / 12

Series 9000 SV9IOC105 Page 3
Cutler-Hammer Document Number: IL.08H.02.T.E
Rev. 01, September 2000
3. Installation
Installation must be performed by a licensed electrician.
WARNING: Shock Hazard.
Components and component boards inside the adjustable
frequency drive may be at incoming voltage potential when the
drive is connected to the supply voltage. Contact with live
components may cause serious injury or death.
3.1 Incoming Inspection
The 120 Volt Input Board Kit includes the following components
(see figure 1 below):
Item Quantity
1. SV9IOC105 board 1
2. Protective plastic board 1
3. Standoff 1
4. Terminal blocks (terminals 1–5 and 18–20) 1 each
5. Power cable 1
6. Data cable 1
7. Insulating sticker (only used with Compact NEMA1 drives) 1
8. Mounting plate
(only used with NEMA 1, NEMA 12, and Protected Chassis drives)
1
9. Mounting screw 1
10. Software diskettes 2
11. SVDrive Cable 1
12. 120V Input Option Board Instruction Manual 1
13. SVReadyE Supplements to the SV9000 Manuals 7
1
2
3
4
5
6
7
8
9
Figure 1:Parts Included in the 120 Volt Input Board Kit