16. Loosen or remove the center right and center bottom screws. This loosens the display plate so you
can get the touchscreen ribbon cable connector out. See Figure 8.
17. Remove front panel and lay it aside.
Front
Panel
Display
Display
Plate
Figure 8
18. Remove the four corner screws of the display. See Figure 9. As you remove the display from the
display plate, be careful to disconnect the video cable by pulling straight back and gently guide the
backlight cable through the opening. It may be retained by the standoff.
Backlight
Cable
Screws
Figure 9
January 2006
Page 7 of 14
01-50604-01
