background image

VISOR INSTALLATION INSTRUCTIONS

1.  Remove power from floodlight.
2.  Place floodlight face up.
3.  Carefully align visor with two (2) screw holes at the top of the fixture 

shown in the image above.

4.  Install screws provided with visor, taking care to not scratch the finish of 

the floodlight. Torque to 80 in-lbs (9.0 N-m).

5.  Install floodlight per above instructions.

NOTE:

  Visor can be installed before or after floodlight has been in operation.

GUARD INSTALLATION INSTRUCTIONS

1.  Remove power from floodlight.
2.  Place floodlight face up.
3.  Carefully align guard with four (4) screw holes on each side of the 

fixture shown in the image above.

4.  Install screws provided with guard taking care to not scratch the finish 

of the floodlight.  Torque to 80 in-lbs (9.0 N-m).

5.  Install floodlight per above instructions.

NOTE:

  

Guard can be installed before or after floodlight has been in 

operation. 

NOTE:

 

 Visor and guard can both be used on a floodlight at the same time.  

Visor and guard are always installed in the field and are not factory installed.

All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof are not 

guaranteed. In accordance with Eaton’s Crouse-Hinds Division’s “Terms and Conditions of Sale,” and since conditions of use are outside our control, the purchaser should determine 

the suitability of the product for his intended use and assumes all risk and liability whatsoever in connection therewith.

Eaton’s Crouse-Hinds Division 

IF 1684

1201 Wolf Street Syracuse, NY 13208  •  U.S.A. 

Revision 2

Copyright© 2022 

Revised 04/22

 

 

Supersedes  12/13                                                           

Reviews: