background image

INS #

Brand Logo  

reversed out of 

black

INS #

IL504001EN

Installation Instructions – CoviO Linear Cove System
#
#

Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this 

product must be performed by a qualified electrician. This product must be installed in accordance 

with the applicable installation code by a person familiar with the construction and operation of 

the product and hazards involved. 

Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or 

attempting any maintenance. Disconnect power at fuse or circuit breaker.

Risk of Fire- Minimum 90°C supply conductors.

Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.

Risk of Personal Injury- Due to sharp edges, handle with care.

Failure to comply with these instructions may result in death, serious bodily injury and property 

damage.

WARNING

DISCLAIMER OF LIABILITY: Eaton assumes no liability for damages or losses of any kind that may arise from the 

improper, careless, or negligent installation, handling or use of this product. 
IMPORTANT:

 

Read carefully before installing fixture. Retain for future reference.

 

NOTICE:

 

Green ground screw provided in proper location. Do not relocate.

NOTICE:

 

Fixture may become damaged and/or unstable if not installed properly.

ote:

N

Specifications and dimensions subject to change without notice

.

ATTENTION Receiving Department:

 

Note actual fixture description of any shortage or noticeable damage on 

delivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be 

filed within 15 days of delivery. All damaged material, complete with original packing must be retained.

io Lighting

Summary of Contents for CoviO

Page 1: ...to sharp edges handle with care Failure to comply with these instructions may result in death serious bodily injury and property damage WARNING DISCLAIMER OF LIABILITY Eaton assumes no liability for damages or losses of any kind that may arise from the improper careless or negligent installation handling or use of this product IMPORTANT Read carefully before installing fixture Retain for future re...

Page 2: ... Close junction box by tightening top screws Beginning of Run Power Cord Beginning of Run Junction Box Line Voltage Power Feed By Others Beginning of Run Male Connector WIRING CHART Fixtures utilize a Green Pigtail or a Green Through Wire for grounding HOT NEUTRAL GROUND CONTROL 1 CONTROL 2 Black White Green Purple Gray 6 Secure mounting clips with 2 screws in straight line at least 2 from wall fo...

Page 3: ...es to assure alingnment between fixtures within the cove Connectors have 2 standoffs to align with the cove wall and optimize cove lighting performance 2 10 Install fixture into mounting by making sure mounting channel in the bottom of the fixture engages with the mounting clip Fixture can then be rotated into place making sure the top clip engages in the upper mounting channel to secure fixture i...

Page 4: ...terference 2 This device must accept any interference received including interference that may cause undesired operation Note The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance Such modifications could void the user s authority to operate the equipment Note The equipment has been tested and found to comply with the limits ...

Reviews: