2
Instructional Leaflet
LCR 6600 RFN Load Control Switch (Brazil)
SAFETY FOR LIFE
Eaton’s Cooper Power Systems™ products meet or exceed all applicable industry standards relating to product
safety. We actively promote safe practices in the use and maintenance of our products through our service
literature, instructional training programs, and the continuous efforts of all Eaton’s Cooper Power Systems
employees involved in product design, manufacture, marketing, and service.
We strongly urge that you always follow all locally approved safety procedures and safety instructions when working
around high voltage lines and equipment and support our “Safety For Life” mission.
SAFETY INFORMATION
The instructions in this manual are not intended as a
substitute for proper training or adequate experience in
the safe operation of the equipment described. Only
competent technicians who are familiar with this
equipment should install, operate, and service it.
A competent technician has these qualifications:
•
Is thoroughly familiar with these instructions.
•
Is trained in industry-accepted high- and low-voltage
safe operating practices and procedures.
•
Is trained in the electrical safety codes and standard
installation techniques that pertain to this type of
equipment.
•
Is trained in the use of safety equipment such as safety
glasses, hard hat, gloves, etc.
Following is important safety information. For safe
installation and operation of this equipment, be sure to
read and understand all cautions and warnings
.
Safety Instructions
Following are general caution and warning statements
that apply to this equipment. Additional statements,
related to specific tasks and procedures, are located
throughout the manual.
!
SAFETY
FOR LIFE
!
SAFETY
FOR LIFE
Hazard Statement Definitions
This document may contain four types of hazard
statements:
DANGER:
Indicates a hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING:
Indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION:
Indicates a hazardous situation which,
if not avoided, could result in minor or moderate
injury or equipment damage.
CAUTION:
Indicates a potentially hazardous situation
which, if not avoided, may result in equipment damage only.
DANGER:
Hazardous voltage. Contact with
hazardous voltage will cause death or severe
personal injury. Follow all locally approved safety
procedures when working around high and
low-voltage lines and equipment.
G103.3
DANGER:
Before installing, operating,
maintaining, or testing this equipment, carefully
read and understand the contents of this
document. Improper operation, handling, or
maintenance can result in death, severe personal
injury, and equipment damage.
G101.0
DANGER:
This equipment is not intended to
protect human life. Follow all locally approved
procedures and safety practices when installing or
operating this equipment. Failure to comply may
result in death, severe personal injury, and
equipment damage.
G102.1
