Rigid one-piece
hotstick handle
Figure 11 . 100 A tap-changer mounting with rigid one-
piece hotstick handle (One-phase switch view shown .)
* Dimension will decrease as tank wall thickness increases.
Maximum dimension given with 14 gauge tank wall.
Figure 12 . One-phase rigid one-piece hotstick
* Dimension will decrease as tank wall thickness increases.
Maximum dimension given with 14 gauge tank wall.
Figure 13 . Rigid one-piece hotstick—front view
* Dimension will decrease as tank wall thickness increases.
Maximum dimension given with 14 gauge tank wall.
5
INSTALLATION INSTRUCTIONS
MN800014EN February 2017
100 A tap-changer switch cap/wrench, lever or hotstick operable handles installation instructions