Eaton ConnectUPS Web/SNMP Card Quick Start Instructions 164950185—Rev D 9
Section 4
Initialize the Card Configuration
NOTE
These instructions show HyperTerminal screen images, but you
can use the terminal emulation program of your choice, such as
PuTTY.
NOTE
Before you start initializing the card configuration, you will need
to know which COM port you are using on your computer.
To initialize the card configuration:
1.
Verify that the serial cable (supplied) connects the card’s COM port to the
computer’s COM port. Also verify that the UPS is on and in normal mode.
2.
Click
Start
in the computer Start bar. Type
Device
in the search box. Select
Device Manager
in the list above the search box. The Device Manager
opens.
3.
Locate
Ports (COM & LPT)
in the list and click the adjacent “plus box” to
expand the selection. Make a note of the COM port you are using.
4.
Open HyperTerminal.
5.
Respond
Yes
or
No
to the message asking if you want to make
HyperTerminal your default terminal emulation program. The New
Connection dialog opens.
6.
Optional.
When the Connection Description dialog box opens, enter a name
for this connection and click
OK
. Otherwise, click
Cancel
.
7.
In the New Connection dialog, make the menu selection
File > Properties
.
On the screen that displays, select
New Connection Properties
.
8.
Click the Connect To tab. From the
“Connect Using...”
drop-down list, select
the COM port that you are using (see Figure 5).
Summary of Contents for ConnectUPS Web/SNMP Card
Page 25: ......
Page 26: ...164950239 164940185 D ...