Eaton ConnectUPS Web/SNMP Card Quick Start Instructions 164950185—Rev D 13
4.
At the main menu, type
3
at the prompt and press
Enter
to restart the card
(see Figure 8).
Figure 8. Restart the Card
NOTE
When the green UPS Data LED flashes regularly, the card has
been restarted and is operating normally.
5.
From the main menu, type
1
and press
Enter
. The Web/SNMP Settings
menu displays.
6.
Type
1
to see the current setting for the IP address and press
Enter.
7.
The DHCP-assigned IP address displays. Make a note of this address.
8.
Type
0
and press
Enter
to return to the main menu.
9.
Verify network communication:
a.
Open a browser, enter the IP address in the Address bar, and click
Go
. If
the assigned IP address is working,
you are prompted to log on.
b.
Log on as administrator. The default user name and default password
are “admin.”
c.
When the ConnectUPS Web/SNMP card Web page displays, you know
that the card is communicating with the network.
Summary of Contents for ConnectUPS Web/SNMP Card
Page 25: ......
Page 26: ...164950239 164940185 D ...