![background image](http://html1.mh-extra.com/html/eaton/ceag-sou-cg-s-2-x-4a/ceag-sou-cg-s-2-x-4a_mounting-and-operating-instructions_3832472008.webp)
8
Manual CEAG SOU CG-S 2 x 4A
40071860189 (C) February 2016 www.ceag.de
7 Statusausgabe über
Blinkcode per Service Pin
7 Status output with flash code
via service pin
1. Pressing the service pin for at
least 5 s activates the flash code.
2. The display mode is shown with alternating
flashing with the red LEDs , .
3. Following 1 s pause (both LEDs off), display
of the code for circuit 1 starts.
4. Briefly pressing the service button calls
the next fault.
Flash code description:
1 flash = luminaire fault
2 flash = fuse fault
3 flash = overload
4 flash = over-temperature
5. This now proceeds with the second circuit
(from step 3).
If point 4 is not implemented, normal display is
resumed after approx. 30 s.
1. Drücken des Service-PIN für
mind. 5 s aktiviert den Blinkcode.
2. Der Blinkcode wird mit einem abwechselnden
Blinken der beider roten LEDs ,
angezeigt.
3. Nach 1 s Pause (beide LED aus) beginnt die
Anzeige des Codes für Stromkreis 1.
4. Ein kurzes Drücken des Servicetasters ruft
den nächsten Fehler ab.
Blinkcode-Erklärung:
1 x Blinken = Leuchtenstörung
2 x Blinken = Sicherungsfehler
3 x Blinken = Überlast
4 x Blinken = Übertemperatur
5. Jetzt geht es entsprechend mit Stromkreis 2
weiter (ab Schritt 3).
Wenn Punkt 4 nicht durchgeführt wird, dann
wird nach ca. 30 s wieder in die Normalanzeige
gewechselt.
1
3
2
1
3
2
8 Bustechnologie
8 Bustechnology
3
2
1