is selected then the options displayed below
can all be manually edited.
Please Note
: It is advised that if the IP
address is assigned via DHCP that the IP
assignment mode is changed to Static to
retain the IP address should there be a loss
of power to the camera or the router.
Log list
The installer can view the system log of the
camera.
Factory Default
If you forget your password, please follow
the steps to revert back to default value.
1.
Remove the power adapter and
Ethernet cable from the camera.
2.
Press and hold the Default button on
the back of the camera
3.
Connect back the power to the camera.
It will take around 30 seconds for the camera
to boot.
4.
Release the Default button after the
camera finishes booting.
5.
Re-login the camera by using the
default IP (http://192.168.0.200), and user
name: admin, password: admin.
Specifications
Hardware
CPU:
Multimedia SoC
RAM:
256MB
Flash:
16MB
Image Sensor:
1 / 2.7” Mega-Pixel CMOS
sensor
Sensitivity:
Color : 0.1 Lux (AGC ON)
Black & white: 0.05 Lux (AGC ON)
Lens Type:
2.8mm @ F2.0
View Angle:
111.10°(H), 65.10°(V)
ICR:
IR cut filter mechanism
Audio:
G.711(64K) and G.726(32K,24K)
Input : Mic built-in
Output : 3.5mm phone jack, or Speaker
Support 2-way audio
I/O:
1 DI / 1 DO
Video Output:
N/A
PIR:
Yes
Power over Ethernet:
Yes
Power Consumption:
DC 12V Max: 3.6W
(IR ON); 2.76W (IR Off)
PoE Max: 4.3W (IR ON); 3.3W (IR Off)
Operating Temperature:
0°C ~ 45°C
Dimensions:
62mm x 100mm x 44mm
Weight:
230g
IR LEDs
LEDs:
4 LEDs, 850nM,
IR Distance:
8M
System
Privacy Mask:
Yes, 3 different areas
Compression Format:
H.264/ M-JPEG
Video Bitrates Adjust:
CBR, CVBR
Motion Detection:
Yes, 3 Different Areas
Triggered Action:
Mail, FTP, Save to SD card,
Samba, DO
Pre/ Post Alarm:
Yes, configurable
Security:
Password protection, IP address
filtering, HTTPS encrypted data transmission,
802.1X port-based authentication for network
protection, QoS/DSCP
Firmware Upgrade:
HTTP mode, can be
upgraded remotely
Simultaneous Connection:
Up to 10
Micro SD card management
Recording Trigger:
Motion Detection, IP
check, Network break down (wire
only),Schedule, DI
Video Format:
AVI, JPEG
Video Playback:
Yes
Delete Files:
Yes
Web Browsing Requirement
OS:
Windows 7, 2000, XP, 2003, Microsoft IE
6.0 or above, Chrome, Safari, Firefox.
Mobile Support:
iOS 4.3 or above, Android 1.6
or above.
Hardware Suggested:
Intel Dual Core
2.53G,RAM: 1024MB, Graphic card:128MB
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Eaton Electrical Products Ltd declares that
the radio equipment type CAM-INT-00 is in
compliance with Directives 2014/53/EU. The full text
of the EU declaration of conformity is available at the
following internet address:
www.touchpoint-online.com
The information, recommendations, descriptions and safety
notations in this document are based on Eaton
Corporation’s
(“Eaton”) experience and judgment and may not cover all
contingencies. If further information is required, an Eaton
sales office should be consulted. Sale of the product shown
in this literature is subject to the terms and conditions
outlined in appropriate Eaton selling policies or other
contractual agreement between Eaton and the purchaser.
THERE ARE NO UNDERSTANDINGS, AGREEMENTS,
WARRANTIES,EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF FITNESS FOR A PARTICULAR
PURPOSE OR MERCHANTABILITY, OTHER THAN
THOSE SPECIFICALLY SET OUT IN ANY EXISTING
CONTRACT BETWEEN THE PARTIES. ANY SUCH
CONTRACT STATES THE ENTIRE OBLIGATION OF
EATON. THE CONTENTS OF THIS DOCUMENT SHALL
NOT BECOME PART OF OR MODIFY ANY CONTRACT
BETWEEN THE PARTIES.
In no event will Eaton be responsible to the purchaser or
user in contract, in tort (including negligence), strict liability
or other-wise for any special, indirect, incidental or
consequential damage or loss whatsoever, including but not
limited to damage or loss of use of equipment, plant or
power system, cost of capital, loss of power, additional
expenses in the use of existing power facilities, or claims
against the purchaser or user by its customers resulting from
the use of the information, recommendations and
descriptions contained herein. The information contained in
this manual is subject to change without notice.
© 2016 Eaton
Eaton, Security House,
Vantage Point Business
Village, Mitcheldean,
GL17 0SZ
Product Support (UK) Tel: +44 (0) 1594 541978 available
08:30 to 17:00 Monday to Friday.
email:
Part number 12692249 Issue 1 04/07/16
